DX Gaming
http://www.dxgaming.com/forums/

Blacksmithy
http://www.dxgaming.com/forums/viewtopic.php?t=19210		 Page 2 of 3
Author:  aimee [ Fri Jul 18, 2008 2:27 am ]
Post subject: 
Ok im GM Mining and GM Blacksmith and when im mining i seem to be failing to get ore SOO much, also when mining im only pulling up 2-3 ore at a time, these two problems are making mining take alot more time than before which sucks because its hard to get alot of ore as it is.
Then once ive spent alot of time mining and i go to smelt my ore im losing ALOT of it.
This is making GM mining and Blacksmith a pain in the ass lol
The amount i fail to mine ore and stuff id expect to see this at 50 mining not GM.
Author:  Barney [Reapers] [ Fri Jul 18, 2008 2:43 am ]
Post subject: 
Saw this yesterday when i had a abash at Mining and smelting - Its rather disheartening but i suppose in the longrun it could be worthwhile - prices of armour will go up becaus of the fail rate.

I think its another thing just to try and balance the shard and stop a select few having the monopoly of the shard.
Author:  Dedo [ Fri Jul 18, 2008 10:31 am ]
Post subject: 
i noticed that the first 10 squares i mined post patch i failed almost every swing but then it seemed to go back to normal. I didn't notice anything odd in the drops though.
Author:  SoM [ Fri Jul 18, 2008 10:38 am ]
Post subject: 
i had 20 fails in a row while mining, max ore i get from a square is 1-3 ores

and why is Mytheril so hard to smelt? from 20 ore i get like 5-6 igs, i have more success smelting Rose lol
Author:  aimee [ Fri Jul 18, 2008 11:02 am ]
Post subject: 
took me 2 hours to get 3 rose ore and i only got 1 ingot :(
But yeah i lose ALOT of myth, verite, valo etc etc
Author:  SoM [ Fri Jul 18, 2008 11:05 am ]
Post subject: 
i just did a 20 minute non stop mining session and didnt get one single IRON ORE...WTF

only rusty+
Author:  Echo [ Fri Jul 18, 2008 7:44 pm ]
Post subject: 
I don't particularly like the changes either.

The reduced ore amounts per dig aren't too bad to get used to but failing on the ores is frustrating. If it was set so the fails on ores were about the same as what they used to be I think things would be fine. Blacksmithing always evened things up.
Author:  Dedo [ Wed Jul 23, 2008 11:09 am ]
Post subject: 
i was wondering if anyone had the new fail rates for smelting and bs? and if so could i get a copy? trying to do a new price guide based on the amount of time it takes to find all the ore necessary and the fail rates but fail rate wasn't something i had bothered calculating in the past.
Author:  Apocalypse [ Wed Jul 23, 2008 11:59 am ]
Post subject: 
just 1 other thing that makes this f****** shard suckass even more..
Author:  _Venom_ [ Wed Jul 23, 2008 3:05 pm ]
Post subject: 
If it sucks so much than quit bitching and gtfo and dont come back, your not wanted here.
Author:  Apocalypse [ Wed Jul 23, 2008 7:08 pm ]
Post subject: 
Quote:
If it sucks so much than quit bitching and gtfo and dont come back, your not wanted here.
I don't give a flying f*** if I'm wanted here or not, if you're so sick of me bitching then just stray away from wherever I post. No one gives a camel's ass about you, so go f*** yourself.
Author:  _Venom_ [ Wed Jul 23, 2008 9:28 pm ]
Post subject: 
I'll see what i can do..... Troll :roll:
Author:  Apocalypse [ Wed Jul 23, 2008 11:53 pm ]
Post subject: 
lawl, mission accomplished
Author:  Dedo [ Thu Jul 24, 2008 6:07 pm ]
Post subject: 
Quote:
i was wondering if anyone had the new fail rates for smelting and bs? and if so could i get a copy? trying to do a new price guide based on the amount of time it takes to find all the ore necessary and the fail rates but fail rate wasn't something i had bothered calculating in the past.
ok i had a legitimate question can you guys take it somewhere else please?
Author:  Tax_man [ Thu Jul 24, 2008 6:27 pm ]
Post subject: 
Just done a little mining and tbh didn't really get why diff ingots have diff weight values - shouldn't it be like the whole 1lb feathers - 1lb... i dunno bananas or something? hehe :)
Page 2 of 3 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/